DPT: Digital Percentage Timer
Digital Display:
• Remaining Time
• Cycle Time &
Percentage Settings
• Power-Up Delay
• Interval Hours
• Running Hours
Multiple Mounting Dimensiona
SPDT Contacts
Gasketed Bezel
Operation
The DPT is a Digital Percentage Timer. Operational information is displayed for easy viewing: time remaining until relay transfer, relay status, running hours & set-up parameters. With the supply voltage active, the DPT will activate the relay output for the percentage of time selected in set-up. For total cycle time, you can select between 1, 15, 30, and 60 minutes. On time can be selected in 5% increments from 5% to 95% or manual On or Off. There is a re-start timer selection from 0-10 minutes to allow for staggered starting of multiple machines. A running hour meter shows the total closeure time for the output contacts since the last reset.
Specifications
Electrical
Supply Voltage:
24VAC, 120VAC & 240VAC, 1Ø
Frequency: 50/60Hz
Display: 16 Character, 2 Line, LCD
Back Lighting
Adjustments:
Membrane Buttons
Percentage On Time: 5% to 95%, 5% Increments
Manual: On or Off
Total Cycle Times: 1, 15, 30 & 60 Min.
Power-Up Delay: 0 Sec. to 10 Min., 30 Second Increments Running Hours: 0 to 99,999 Hrs.
Total Running Hours: 99,999
Interval Running Hours: 99,999, resettable to zero
Output Rating @ 25°F:
10 Amps @ 120VAC
6 Amps @ 277VAC
1/8 HP @ 120/277VAC
5 Amps @ 24VDC
Physical
Mounting: Panel Mounting
4 - Inserts for 2 Mounting Dim
Termination: Pluggable Block
Packaging: Gasketed Bezel
Weight: 1 Pound
Ambient Temperatures
Operating: -4°F to 140°F
Storage: -40°F to 185°F