TDR-R: Repeat Cycle Timer
• 24 to 240VAC/VDC
(Universal Voltage)
• Repeat Cycle
(First Cycle On)
• Time ranges up to
24 hours
• Adjustment Knobs
• Plug-In Package
• SPDT or DPDT Contacts
• Status LEDs
Operation
When the supply voltage is applied to the TDR-R, the first delay period (off time) begins. At the end of the Off time period the internal relay is energized and the second delay period begins (On time). At the end of the On time the internal relay is de-energized. The TDR-R will continue to cycle the internal delay until the supply voltage is removed. Two sets of adjustment knobs are used to set the Off and On times. Two allow the operator to select seconds, minutes, or hours independently for the Off and On times. The other two knobs allow the operator to select a fine adjustment for each of the time delays. Removal of supply power resets the timer.
Specifications
Electrical
Supply Voltage: 24 to 240VAC/VDC
Frequency: 50/60Hz
Function: Repeat Cycle
Time Ranges: 0.1Sec. up to 24 Hrs.
Fine Adjustment Pot: Adjusts within Range
Power Consumption: 1.5VA
Indicators: 2 LEDs
Output Rating @ 25°C:
5 Amps @ 250VAC (General Purpose)
1/8 HP @ 120VAC
5 Amps @ 30VDC
B300 (Pilot Duty)
360 VA
3 Amps @ 120VAC
1.5 Amps @ 240VAC
Physical
Mounting: Plug-In
Termination: 8 or 11Pin
Packaging: Dust Cover
Weight: 8.5 Oz. Approx.
Ambient Temperatures
Operating: 0°C to 60°C
Storage: -40°C to 85°C